| Field Link Settings ESC Compatibility | |||||||||
| Setting | Sidewinder Micro 2 |
Mamba Micro X |
Sidewinder 3 | Mamba Max Pro |
Mamba X
|
Sidewinder 8 |
Mamba Monster 2 |
Mamba Monster X |
Mamba XLX |
| Cutoff voltage |  |
|
|
|
|
|
|
|
|
| Auto LiPo volts/cell | |
|
|
|
|
|
|
|
|
| Drag brake | |
|
|
|
|
|
|
|
|
| Brake strength | |
|
|
|
|
|
|
|
|
| Punch control | |
|
|
|
|
|
|
|
|
| Reverse type | |
|
|
|
|
|
|
|
|
| Motor type | |
|
|
|
|
|
|
|
|
| Motor timing and CHEAT mode* | |
|
|
|
|
|
|
|
|
*C.H.E.A.T. mode is a feature of the Mamba Max Pro, Mamba X and Mamba Monster X ESC only.
| Technical Specs | |
|---|---|
| System requirements: | Castle Link software is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10. |
| Items needed for operation: | Field Link contains a proprietary interface adapter and standard USB cable. All you need is an available USB port on your PC. |
| Application guidelines: |
Field Link Portable Programmer for Driving works with all Castle Link compatible car controllers including: Sidewinder Micro, Mamba 25, Mamba Micro Pro, Sidewinder 3, Mamba Max (only connects using the throttle cable. You must upgrade the Mamba Max to software version 1.23 or higher with your Windows PC to enable throttle cable USB connectivity), Mamba Max Pro, and Mamba Monster (all versions). Requires USB 2.0 on a Windows PC running Castle Link software. |
| Tech notes: |
Field Link card cannot change settings on controller series that do not have the listed settings. See settings compatibility chart above for details. Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations. If your Field Link LEDs are flashing continuously, it is likely in need of a firmware update. See the Field Link Firmware Compatibility page for more details. |